Formulation development often boils down to determining the optimum combination of ingredients in a mixture, which can make the difference between success and failure in many diverse fields of research, such as materials, pharmaceuticals, adhesives and coatings. The traditional approach to experimentation changes only one process factor at a time (OFAT) or one component in a formulation. However, with this approach, it’s easy to overlook interactions of factors or components, a likely occurrence in developing formulations.
By sizing experiment designs properly, test and evaluation (T&E) engineers can assure they specify a sufficient number of runs to reveal any important effects on the system. For factorial designs laid out in an orthogonal matrix this can be done by calculating statistical power. However, when a defense system behaves in a nonlinear fashion, then response surface method experiment (RSM) designs must be employed. The test matrices for RSM generally do not exhibit orthogonality, thus the effect calculations become correlated and degrade the statistical power. This in turn leads to inflation in the number of test runs needed to detect important performance differences that may be generated by the experiment. A generally acceptable alternative to sizing designs makes use of fraction of design space (FDS) plots. This article details the FDS approach and explains why it works best to serve the purpose of RSM experiments done for T&E.
The efficiency of a gasoline fueled engine is highly influenced by the fuels antiknock characteristics, which depend essentially on the chemical composition. The adequate performance of a vehicle depends on a minimal volatility of the fuel, which can be expressed by several characteristics such as distillation curves, vapor pressure, vaporization enthalpy and the vapor/liquid ratio. The vapor pressure of gasoline is directly related to the emission of volatile compounds from gasoline and the ensuing combustion processes, especially in starting the engine on cold days and in continuous operation in hot days. This prospective study experimented on the product distribution at chemical equilibrium for the simultaneous liquid-phase etherification of isobutene and isoamylenes with ethanol over Amberlyst™ 35.
Experimentation informs every part of the biologic life cycle. But it is costly and time consuming — especially when you are using outdated methods. As you strive for more efficiency from your scientists and engineers, can you streamline your work processes to get more learning with less experimentation?
Both multivariate analysis (MVA) and design of experiments (DoE) methods have numerous applications for simplifying the learning from large data sets and experimentation. However, many scientists and engineers still perceive these methods to be complex. Today’s newer, intuitive software applications make these techniques user-friendly for even non-statisticians. Early adopters are seeing decreased time to market, reduced development and production costs, and improved quality and reliability.
A pilot plant usually plays a key role in process development by providing essential data related to operation, safety, scale-up and other issues. The value of the pilot plant depends on the validity of the data captured. Planned experimentation is crucial to gathering meaningful data, and design of experiments (DOE) is the gold standard for finding results which are statistically significant.
A generic pharmaceutical manufacturer recently hired VerGo Pharma Research Laboratories Pvt. Ltd to develop a bioequivalent with different polymorphic forms for an anti-depressant drug that had previously been patented in crystalline form only. Bioequivalence requires that a drug be pharmaceutically equivalent and that it be delivered at the same rate and same level of bioavailability so that its efficacy and safety can be expected to be the same as the original product. By using optimal response surface methods (RSM) to reduce the number of tests required (to determine the effects of inactive ingredients on bioavailability in both fed and fasting conditions), VerGo was able to cut the development process from several years to only four months.
This article offers a five-step method to finding the optimum or "best" weld. The method detailed below utilizes a statistical tool known as the two-level factor approach. This well-tested method will assist an investigator in identifying what is to be optimized, choosing inputs for evaluation, running the tests so that statistically significant data is generated, analyzing data, and finally determining the settings for the significant inputs which result in the optimum weld.
Learn how DOE and response surface methods (RSM) catalyze process development and optimization (requires membership to view).
OMG Borchers paint-chemists were challenged to find a second source for an associative thickener. They set up a mixture design of experiment to screen the effects of four candidate additives. Aided by Design-Expert software, they accomplished their mission in a timely fashion. When the new formulation was prepared and tested, its performance in every application could not be discerned from the incumbent.
An industrial equipment supplier wanted to find the best operating conditions, as well as determine what performance its product could deliver for ethanol producers, before putting the device on the market. A DOE was run to successfully identify and validate a measurement method that has enabled the supplier to accurately evaluate the performance of the new product in a large number of plants under a wide range of operating conditions.